Product added to compare
Product Compare added Product Compare
In the picture you can see a Proboxx.
Made in Germany

The proboxx

SYNERGY OF DESIGN AND FUNCTION

Flexible, functional and elegant – these are the characteristics featuring the new enclosure series proboxx of GEORG SCHLEGEL GmbH & Co. KG placed in Duermentingen. With the new product line, the portfolio of enclosures of the expert for pushbuttons and switches is complemented by a particularly classy and at the same time practical variant that makes daily work easier.

SCHLEGEL currently offers the proboxx as an empty enclosure or as assembled enclosure for four different systems.

Configurator

SIMPLE

The enclosures are quick and easy to assemble thanks to the new innovative mounting mechanism

In the picture you can see a Proboxx.

FUNCTIONAL

Icon Bulletpoint

Direct integration in IO-Link and AS-Interface systems.

Icon Bulletpoint

Asymmetrical placement on guard lockings

Icon Bulletpoint

Flexible labelling option

In the picture you can see a Proboxx mounted on a safety gate.

Plug & Work

Simply to connect with M12 connection technology, no wiring necessary

The picture shows a Proboxx with an M12 connection.

Flexible

Icon Bulletpoint

Up to 4 holes for pushbuttons and switches

Icon Bulletpoint

Various connection options (M12, M16 cable gland, radio system).

Icon Bulletpoint

Available as pre-equipped or empty enclosure

On the picture you can see a Proboxx, which is about the command points.

VALUABLE

Appealing, high-quality and modern design

In the picture you can see a Proboxx.

RELIABLE

Icon Bulletpoint

Stable plastic enclosure

Icon Bulletpoint

Asymmetrical placement on guard lockings

Icon Bulletpoint

Degree of protection IP65

In the picture you can see a plastic housing from the Proboxx and a hammer.

EMPTY ENCLOSURES

Bulletpoint Icon

Individual use

Bulletpoint Icon

With predetermined breaking point for M16 cable gland

Bulletpoint Icon

Without predetermined breaking point for the use with radio systems or special connectors

In the picture you can see a plastic housing from a Proboxx.
The picture shows an assembled M12 housing.

EQUIPPED M12 ENCLOSURES

Bulletpoint Icon

For conventional wiring

Bulletpoint Icon

With two M12 connectors

Bulletpoint Icon

The emergency-stop is connected separately via the second M12 connector

EQUIPPED IO-LINK ENCLOSURES

Bulletpoint Icon

IO-Link certified

Bulletpoint Icon

With two M12-Anschlüsse (IO-Link / Not-Halt (AIDA))

Bulletpoint Icon

IO-Link status indication

Bulletpoint Icon

The following features can be parameterised:

Bulletpoint Icon

Dimming or night design of all LEDs

Bulletpoint Icon

Operating hours meter

Bulletpoint Icon

Monitoring of switching cycles (lifetime) of each pushbutton or switch

Bulletpoint Icon

Monitoring of the status indication

The picture shows an equipped IO-Link housing.
The picture shows an assembled AS-Interface housing.

EQUIPPED AS-INTERFACE ENCLOSURES

Bulletpoint Icon

AS-Interface certified

Bulletpoint Icon

With two M12 connectors (bus is looped through)

Bulletpoint Icon

AS-Interface status indication

EQUIPPED ENCLOSURES WITH SWAVE® RADIO TECHNOLOGY

Bulletpoint Icon

sWave® technology of steute

Bulletpoint Icon

Frequency range 868 MHz (EU and China)

Bulletpoint Icon

Range of up to 450 m in the open field and up to 40 m indoors

TRANSMITTER

Bulletpoint Icon

Bidirectional communication (transmitter electronics with long-life battery)

Bulletpoint Icon

LED for status indication (monitoring of switching states and battery)

PUSHBUTTONS AND SWITCHES

Bulletpoint Icon

4 potential-free relay outputs (NO)

Bulletpoint Icon

Learning mode (assignment of outputs)

Bulletpoint Icon

LED status indication (switching states)

Bulletpoint Icon

Up to 40 transmitter units (pushbuttons, switches) can be managed with one receiver

The photo shows a housing equipped with Swave wireless technology.

THE PROBOXX IN DETAIL

For the development of the proboxx, particular attention was given to its design. Therefore, the screw fitting was deliberately placed on the bottom side, so the enclosure's appearance is not disturbed by exposed screw heads. This aesthetic detail aligns with the added value of safety: The enclosure cannot be opened without dismounting it. A newly created special nameplate fits the design perfectly and can be clipped on easily. The inscription is custom-made and engraved by lasering.

Bulletpoint Icon

High-quality, stable enclosure made of polyamide

Bulletpoint Icon

Innovative mounting mechanism for base, wall and profile mounting

Bulletpoint Icon

Screw fitting on the bottom

Bulletpoint Icon

Degree of protection IP65

Bulletpoint Icon

Pushbuttons, selector or key switches with 1 or 2 NO

Bulletpoint Icon

Appealing design

Bulletpoint Icon

Asymmetrical placement on guard lockings

Bulletpoint Icon

Labels to clip on (laser marked)

Bulletpoint Icon

Emergency-stop with 2 NC

Dimensions

Bulletpoint Icon

Width 52 mm

Bulletpoint Icon

Height 44 mm

Bulletpoint Icon

Length with M12 connector 189 mm, 153 mm, 117 mm, 81 mm

Bulletpoint Icon

Length without M-12 connector 177 mm, 141 mm, 105 mm, 69 mm

Pushbuttons and switches

Bulletpoint Icon

Pilot light

Bulletpoint Icon

Pushbutton

Bulletpoint Icon

Emergency-stops

Bulletpoint Icon

Selector and key switches

In the picture you can see a Proboxx.

CONFIGURE AND ORDER MY PROBOXX NOW

The proboxx can be ordered and individually equipped using the new Schlegel online configurator for enclosures. Based on your requirements, you can select an empty enclosure or an assembled one and choose from a variety of sizes and systems the most suitable assembly for your application.

configure now
In the picture you can see a Proboxx.
Icon E-Mail Icon Telefon